ASME B31.3 Process Piping Course Handout Intro

ASME B31.3 Process Piping Course Introduction in Accordance with Design, Construction, and Mechanical Integrity

Series of Articles would be coming daily as per table below:

This course will review the basic requirements of the ASME B31 Code for Pressure Piping with emphasis on B31.3, Process Piping. General topics in the course include Code organization and intent, pressure design, design for sustained loads including support design, flexibility analysis, equipment loads, flanges, expansion joints, supports and restraints, materials, fabrication, examination, testing, and, for existing piping systems, mechanical integrity. Applications of these concepts, including simple hand analysis methods and computer based analysis methods, will be demonstrated. Included will be comparisons between ASME B31.3 and ASME B31.1, Power Piping. Inspection and maintenance (mechanical integrity) of existing piping systems will be covered, as provided in API 570, Piping Inspection Code.

Read More

Schneider Electric Conzerv Gurgaon HR Email and Company Address

Schneider Electric Conzerv Gurgaon HR Email and Company Address

Company Name	Schneider Electric Conzerv India Pvt. Ltd
Domain Expertise	EPC - OIL AND GAS
City	Gurgaon
Country	India
Name of HR Manager	Mr.Arunjith Unnikrishnan
Phone/Mobile	009108041189700
Email	arunjith.unnikrishnan@conzerv.com
Website	www.conzerv.com

Read More

Liquid Process Piping - Engineering Design Manual (Must Have)

1. The purpose of this manual is to provide information for the design of liquid process piping.

2. Applicability. This manual applies to all HQUSACE elements and all USACE Commands having responsibility for the design of unit processes for treatment of liquids.

3. Distribution Restriction. Approved for public release; distribution is unlimited.

4. References. References are provided in Appendix A.

5. Scope. This manual is to be used in the selection of piping systems and materials for chemical and physical unit processes. Process piping systems include pipe and appurtenances used to transport fluids. Separate guidance has been provided for plumbing, potable water, sewage, storm drainage, fuel and lubricant systems.

Read More

Quality Engineering Bangalore HR Email and Company Address

Quality Engineering & Software Technologies Bangalore HR Email and Company Address

Company Name	Quality Engineering & Software Technologies
Domain Expertise	EPC - OIL AND GAS & CAD/CAM
City	Bangalore
Country	India
Name of HR Manager	Ms.Sunitha Thejas
Phone/Mobile	00918041190900
Email	sunitha.thejas@quest-global.com
Website	www.quest-global.com

Read More

SNC Lavalin Mumbai HR Email and Company Address

SNC Lavalin Mumbai HR Email and Company Address

Company Name	SNC Lavalin Engineering India Pvt Ltd
Domain Expertise	EPC - INFRASTRUCTURE
City	Mumbai
Country	India
Name of HR Manager	Mr.Athreya Jaishankar
Phone/Mobile	00912267892600
Email	Athreya.Jaishankar@snclavalin.com
Website	www.snclavalin.com

Read More

How to Draw a P&ID (Piping and Instrumentation Diagram) - Separators

This P&ID (Piping and Instrumentation) Tutorial was done for the Queen's University Chemical Engineering, CHEE 470, Design of Manufacturing Processes, 4th year capstone design course.

Two and three phase separators along with two heat exchangers were drawn.

Note the video is slightly out of focus to due a screw up by the instructor who forgot to focus the camera.

Read More

[PPT] Basics of Pipe Rack and Rack Piping

A pipe rack is the main artery of a process unit. It connects all equipment with lines that cannot run through adjacent areas. Because it is located in the middle of the most plants, the pipe rack must be erected first, before it becomes obstructed by rows of equipment. Pipe racks carry process, utility piping and also include instrument and electrical cable trays as well as equipment mounted over all of these.

Contents of the PPT:

Read More

Piping Design Info XLS (40+ Sheets)

Piping Design Info XLS is an excel file which almost contains all sizes of various fittings and structure sizes. This came out handy at many calculations which we requires from time to time while doing piping. Here are the contents of the excel file:

• 150# RF PIPING DIMENSIONS
• 300# RF PIPING DIMENSIONS
• 600# RF PIPING DIMENSIONS
• 900# RF PIPING DIMENSIONS
• 1500# RF PIPING DIMENSIONS
• 900# RTJ PIPING DIMENSIONS
• 1500# RTJ PIPING DIMENSIONS

Read More

Basic Design for Piping: Isometric Drawings

Criteria of Piping Material Application

A spool is a short piece of pipe with flanges on both ends. The word “spool” is derived from the fact that his configuration actually looks similar to the common wood spool upon which sewing thread is wound.

A spool drawing, however, is more complicated than the simple illustration above, since it involves many such “spools” on one sheet of paper. The spool drawing is an isometric drawing rather than an orthographic drawing. It is three-dimensional in that it shows both horizontal and vertical planes. The term “spool” is no longer being used as the name for these drawings. The proper term is “piping isometric”. Slang forms have shortened it to “isometric” or “isos”.

The purpose in making the piping isometric of a piping configuration is threefold:

1. It is used by the Fabricator in fabricating the line.

2. It is used by the Piping Material Group in purchasing the material for the line.

3. It is used by the field crew in erecting the line.

Read More