Tuesday, December 16, 2014

An Introduction to Block Flow Diagram (BFD)

A Block Flow Diagram - BFD, is a schematic illustration of the major process.The block or rectangles used represent a unit operation. The blocks are connected by straight lines which represent the process flow streams which flow between the units. These process flow streams may be mixtures of liquids, gases and solids flowing in pipes or ducts, or solids.



An Introduction to Block Flow Diagram (BFD)

In order to prepare block flow diagrams a number of rules should be followed:

  • unit operations such as mixers, separators, reactors, distillation columns and heat exchangers are usually denoted by a simple block or rectangle. 
  • groups of unit operations may be noted by a single block or rectangle.  
  • process flow streams flowing into and out of the blocks are represented by neatly drawn straight lines. These lines should either be horizontal or vertical.  
  • the direction of flow of each of the process flow streams must be clearly indicated by arrows. 
  • flow streams should be numbered sequentially in a logical order. 
  • unit operations (i.e., blocks) should be labeled. 
  • where possible the diagram should be arranged so that the process material flows from left to right, with upstream units on the left and downstream units on the right.

Get Notified for new Tutorials:
*Check your email to confirm your subscription*


1 comment :

  1. what is the approx. cost of electrical heat tracing per squate meter

    ReplyDelete

 

© 2011 PIPING GUIDE - Designed by Ankit | ToS | Privacy Policy | Sitemap

About Us | Contact Us | Write For Us